You are here:
1599
Back to overview

Article number: 1200

JAZO EXPLOSION HATCH 10MB

A configurable aluminum explosion hatch including frame. The minimum size is 1000x656mm (wxh) and the maximum size is 3000x1456mm (wxh). The hatch is equipped with an ERM (Explosion Release Mechanism) module, which ensures that the panel opens at an overpressure on the inside of 10 mbar. The panel closes after an explosion and will not fragment. The ERM must then be checked and replaced if necessary. This panel can only be used in walls.

The panel must be kept free of obstacles on both the inside and the outside. The panels will remain closed at high wind pressure and wind suction. They can be supplied as a separate panel with a border or as part of a facade. The calculation for the required size and opening pressure must be carried out or verified by an expert engineer.

Version with the following options is possible:

  • Minimum size: 1000x656mm (wxh)
  • Maximum dimensions: 3000x1456 (wxh)
  • Opening pressure: 10mbar
  • Burglar-resistant (compro-Save82 burglar-resistant cassette).
  • Fire resistant (on request).
  • Insulation (heat/sound) on request
  • Ventilation (NEN-EN 1991-1-7:2006/A1:2014, NEN-EN 1634)
  • Applicable standards: NEN-EN 1628, 1629, 1630, NEN 5096
Downloads
Do you have any questions or would you like advice? 0316 - 59 29 11